CAS3
Добавлено: 19 июн 2017, 15:38
BMW_Isn supports ISN reading from immobilizer system CAS3
Use any suitable K-Line or D-CAN BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s
You must apply power, ground, CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN
Use any suitable K-Line or D-CAN BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s
- image001.jpg (11.08 КБ) 42021 просмотр
Run software, adjust COM PORT, press Read, and wait for read ISN
- image001.jpg (20.1 КБ) 42021 просмотр