CAS2
Добавлено: 19 июн 2017, 15:39
BMW_Isn supports ISN reading from immobilizer system CAS2
Use any suitable K-Line or D-CAN BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s You must apply power, ground, CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN
Use any suitable K-Line or D-CAN BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s You must apply power, ground, CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN