CAS1 (E65)
Добавлено: 19 июн 2017, 15:42
BMW_Isn supports ISN reading from immobilizer system CAS1_E65
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s
You must apply power, ground, CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface and switching CAN speed to 100 kbp/s
- image001.jpg (37.18 КБ) 41988 просмотров
Run software, adjust COM PORT, press Read, and wait for read ISN
- image001.jpg (29.25 КБ) 41988 просмотров