DDE626
Добавлено: 19 июн 2017, 15:43
BMW_Isn supports ISN reading from Bosch DDE626
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface
You must apply two powers, ground CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) with D-CAN interface
- image001.jpg (34.79 КБ) 42211 просмотров
Run software, adjust COM PORT, press Read, and wait for read ISN
- image001.jpg (29.48 КБ) 42211 просмотров