MS45 (E6X)
Добавлено: 19 июн 2017, 15:51
BMW_Isn supports ISN reading from DME Siemens MS45
You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)with D-CAN adapter
You must apply two powers,ground CAN High and CAN Low from D-can interface
Run software , adjust COM PORT,press Read, and wait for read ISN
You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)with D-CAN adapter
- image001.jpg (34.51 КБ) 45418 просмотров
Run software , adjust COM PORT,press Read, and wait for read ISN
- image001.jpg (30.27 КБ) 45418 просмотров