Страница 1 из 1

MS45 (Е46,Е83)

Добавлено: 19 июн 2017, 15:55
Alexandr
BMW_Isn supports ISN reading from DME Siemens MS45

You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)
image001.jpg
image001.jpg (46.82 КБ) 44703 просмотра
You must apply two powers,ground and pin 7 from K-Line interface.
Run software , adjust COM PORT,press Read, and wait for read ISN
image001.jpg
image001.jpg (29.32 КБ) 44703 просмотра