Страница 1 из 1

MS42(Е38,Е39,Е46,Е53)

Добавлено: 19 июн 2017, 16:02
Alexandr
BMW_Isn supports ISN reading from DME Siemens MS42

You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)
image001.jpg
image001.jpg (16.87 КБ) 51712 просмотров
You must apply two powers,ground and pin 7 from K-Line interface.
Run software , adjust COM PORT,press Read, and wait for read ISN
image001.jpg
image001.jpg (28.34 КБ) 51712 просмотров